Scansnap S1500 Driver Windows 8.1

ScanSnap S510 Fujitsu Scanner

Fujitsu ScanSnap On Windows 8 – Your Experience. If you have a newer ScanSnap the ScanSnap S1500, able to get it to work on Windows 8. The driver installs.

Use the links on this page to download the latest version of ScanSnap S1100 2 drivers. Supported OS: Windows 10, Windows 8.1, Windows 7, Windows Vista, Windows.

Software Downloads: ScanSnap S1500 / S1500M ; Scanners. ScanSnap. Software Downloads; FAQ; Manuals; Datasheets; Accessories; 64-bit Windows XP Vista 7 8 / 8.1.

ScanSnap S1500: Feature Driver Note1 Note2 ScanSnap Manager V5.1: ScanSnap Manager V3.2: ScanSnap S1500 System Requirements Windows.

ABBYY FineReader for ScanSnap Windows and Mac ScanSnap specific driver Intended for ScanSnap ix500, S1500, S1500M, S510.

ScanSnap S1300 Drivers Download. ScanSnap S1300 Driver Supported OS: Windows 10, Windows 8.1, ScanSnap S1500 Driver Fujitsu.

Description: ScanSnap S1500 Driver Installer; File Version: 8.5; File Size: 2.33M; Supported OS: Windows 10, Windows 8.1, Windows 7, Windows Vista, Windows XP.

Using a Fujitsu ScanSnap with Windows 8 I have a S1500 and have upgraded my PC which runs Unfortunately that s where I got the driver software that will.

Thank you for posting your question in Microsoft Community. You have reported issues with Scan Snap Fujitsu scanner. We need some more information to assist you in a better way.

1.Did you make any changes prior to the issue.

2.What are the troubleshooting steps you have tried to fix the issue.

3.Do you get any error or exclamatory mark in Device manager on the scanner drivers.

4.Have you updated the drivers.

Method: Please check if you see

a.Press Windows X, Click Device Manager.

c.Check if the name of the graphic card is the list.

d.Right click on the Display Adapter s name and click

Please download the drivers and reinstall the latest drivers from the link below.

If this helps that is great. Please contact Fujitsu if this doesn t work out.

Hope this helps. Please get back to us if you have any Windows related questions. We are here to assist you.

I am following your instructions, some of which I have already done prior to my contact with Microsoft Community. I will let you know how I get on.

Be the first person to mark this helpful

S510 SCANSNAP/with Windows 8/ UNABLE TO SCAN PROBLEM SOLVED ABOUT 30 MINUTES AGO.

I googled Error 28, and I found a site: about.com pc web support, TIM FISHER; it stated for error code 28 one should use the device manager.

I had been trying to install a driver via another route. the route I took was as follows for anyone else that may have been having this problem.

Control Panel:/ Device Manager/Imaging Devices/S510 and just follow instructions from there to install drive:   NOW EVERYTHING IS OK I would like to state at this stage that I am not sure if this approach on its own at the outset would have solved

the problem, as I have been fooling around with various downloads, deleting and re-insalling etc stuff from the Fujitsu Site:

Thank you for your assistance,

I had the same problem and I fixed it and it is working find on windows 8 and then on windows 8.1 and now I have it working on windows 10, they told me that it cannot work on windows 10 but I got it to work. make sure that you uninstall all the programs

that you have installed on your computer with the software for scansnap s510. then reboot. make sure that your scanner is unplugged from the usb plug not the power plug and keep it unplugged until you finish installing the software. after installing one software

make sure you say not to reboot at this time and then go to the other two and do the same thing until you reach the third software, the order should be the Manager, Optimizer and then the Card, after the last one then go ahead and reboot. when your computer

reboots back again then go ahead and plug in the usb plug to your scanner. it will then start installing the software to the scanner but there will be a problem on Device Manager. when you go to device manager click on the yellow marker next to the scansnap

s510 and then click update the driver. you cannot update the driver through Microsoft because it will give you an error through a third party INF signature problem. so what you are going to do is direct the system to go to another place where you put the drivers

that I have sent you and tell it that this is where you want it to look for it and just click next and let it go. your system will do the rest and your scanner well start working.

go here and download either the last two downloads, the last one is for 64bit software and the second one is for 32bit. please be advise that these are zip files and your computer will not search into zip

files so make sure you have a zip program. like WinRAR it is free. create a file for the zip file and put it into this file and then inside this file, right click on the zip file and tell it to unzip it into this file and everything inside it will be put into

this file, now you are ready to tell windows where to look for the update of these files and when you do it, your system well be working without a problem. I hope this worked out for you, because I have been in your shoes and I hated when everyone in tech

support told me that it cannot be done and I did not stop until I did it myself, if you have any problems and do not understand what I put here for you than just email me at

Email address is removed for privacy . take care and God bless, amen.

Be the first person to mark this helpful.